Steris 5085 SRT Safety Download Page 4

4

Membrane touch switches provide, through an auxiliary CPU, 
input signals to activate table functions and articulations. LED 
indicators,  LCD Display (see illustration) and soft keys provide 
the following table operation information:

LCD includes:

• Auto Limit Sensors

• Battery Power

• Low Battery

• Maintenance Required

• Tabletop Positioning (FLEX/REFLEX, SLIDE HEAD/FOOT, 

BACK UP/DOWN, LEG UP/DOWN and KIDNEY UP/
DOWN)

• Patient Transport

LEDs include:

• FLOOR LOCK

• NORMAL and REVERSE Patient Orientation

• LEVEL

Touch Pads include:

• Menu Navigation (Forward and Backward)

• Programmed positions in combination with LCD (i.e., 

Beach Chair and Pivot Mode)

• Floor Lock Activation

• TREND/REVERSE TREND

• HEIGHT UP/ HEIGHT DN

• TILT LEFT/ TILT RIGHT

• LEVEL

• STOP

NOTE: The LCD Display values are approximate. Their 
accuracy may vary according to environmental conditions (e.g., 
altitude, humidity, temperature). Also, if a sensor is not operating 
properly, the value indicated may be incorrect. Check patient 
positioning visually before proceeding.  

Foot Control System

 can be actuated at any time and will 

allow table operation in the event of primary control or power 
malfunction. A pedal (foot pump) provides hydraulic power if 
necessary. This foot pedal is located at the side of the table 
base. UNLOCK and SLIDE functions do not require foot pump 
actuation.

Backup (Override) Control System

 can be actuated at any 

time and will allow table operation in the event of primary control 
or power malfunction. A pedal (foot pump to provide hydraulic 
power) and Backup Hand Control (see illustration) comprise 
this system. The Hand Control is located at table leg end behind 
a cover plate and stored in the table base. The foot pedal is 
located at the side of the table base. Included functions on 
Backup Hand Control are: SLIDE HEAD/FOOT, HEIGHT UP/
DOWN, TREND./REV. TREND., TILT RIGHT/LEFT, BACK UP/
DOWN and FLOOR LOCK/UNLOCK.

UNLOCK and SLIDE functions do not require foot pump 
actuation. A green LED on the Backup Hand Control indicates 
the system is active.

Primary Hand Control

See Primary Hand 

Control LCD Display

Soft Keys

Touch Pads

LED

LED

LED

LED

Primary Hand Control LCD Display Examples

Start Screen

Trendelenburg Screen

Patient Transport Screen

ALS Back/Slide Screen

Summary of Contents for 5085 SRT









Reviews: