Example 3 - SSC into Midi-Sequencer/DAW into Synth
You can record the SysEx messages of the SSC into your sequencer to automate
sound changes in your composition - with some limitations concerning Midibus
bandwith. Although we recommend another setup described below, you could plug
the devices like this:
Many sequencers are filtering Midi SysEx by default because it eats a lot of the small
bandwith of the Midi bus and is in most cases not used in the normal music
production process. So please dig into your sequencers settings to disable SysEx
filtering if necessary. Keep in mind the SysEx-message which change the parameters
in your synth are quite 'big' and might jam the Midibus.
Better alternative to example 3
: The SSC has a built in data-translator to convert
Midi Control Change data into the SysEx-data which your synths likes to receive for
parameter changes. For automation of parameter changes we recommend pluging
the SSC between sequencer and synth and to use ordinary Midi Control Change
messages being sent from the sequencer/DAW into the SSC for automation. Midi
Control Change messages are by far more easy to handle and edit than SysEx data.
The wiring is exactly as shown in example 2.
Operation Manual 'Stereoping Synth Controller'
V1.2 - 12.2014
© Stereoping Germany, Hattingen 2014
