"Delay" knob
This knob determines the time, the input signal is
delayed. Fully to the right is the shortest time, fully left
is the longest. This seems to be 'wrong' first. But due
to the logarithmic characteristics of the pot it has the
benefit of a much better and precise feeling for
adjusting the desired delaytime.
"Delay" jack
Feed a positive, negative or bipolar CV into this jack to
modulate the delaytime. Don't worry, you can't break
the module as long as the CV keeps inside the range
of the powersupply (no/- 12 Volt). To archive
the desired effect, it is likely to use an attenuator
getting the CV down to a reasonable level.
The CV and the position of the delay-knob will be
mixed inside the module. The area of modulation will
therefore be shifted if you turn the delay knob.
Manual DELUXE DELAY Eurorack V1.1
© Stereoping Germany, Hattingen 03/2015
