Connecting to power
Interfacing power is the same as on any other
module for eurorack. The pic to the right shows
the typical eurorack power bus pins.
The DELUXE DELAY needs the +5 Volt rail to be
supplied.
!! Please pay double attention to put the
connector cable in the right direction on the
module and the powerbus connector.
Attaching the cable in the wrong way could
lead to damage onto the module or even your
power supply !!
Put the powercable onto the power connector with
the red wire pointing towards the lower edge of
the module.
Like in the picture to the left. (Please do not use
the stickers for orientation, they can be on a
different place on your module).
The red wire indicates the -12 Volt rail.
The other connector of the cable must be
Manual DELUXE DELAY Eurorack V1.1
© Stereoping Germany, Hattingen 03/2015
