Another example: c5 Volt with the input of a foot
volume pedal and connect it's output into the Send-VCA
jack. Now you can paint your musical performance with
more or less delay using the pedal.
The Send-VCA will be modulated by a mix of the
switch and the CV-jack. The CV-jack allows stepless
modulation of the input-signal amount going into the
delayunit. It allows to paint more or less or no delay
onto the input signal.
The switch will be mixed with the CV-jack and is kind
of simple ON/OFF function on the DELUXE DELAY. In
short: you can fully open or close the Send-VCA
without having to use any CVs or cables.
Switch to the LEFT - LED is off – as long as there will
not be any positive CV sent into the jack, the Send-VCA
remains closed. No input signal will reach the delayunit.
Switch to the RIGHT - LED is bright - the VCA for the Delay-Send-Level is completely
open and the whole input signal is sent into the delayunit – the signal level is
dependant on the position of "Send Level".
If the switch is tilted to the left side and a positive CV is used, the LED starts to shine in
dependency of the CV. Please do not expect the LED to be an precise meter, indicating
the opening of the Send-VCA linearily. It's just a simpe indicator.
Creative note
The output of the delay and the feedback path from the delay's output to it's input is
completely independent from the Send-VCA. Still echoing echos or endless feedbackloops
are present even if the Send-VCA is completely closed.
Manual DELUXE DELAY Eurorack V1.1
© Stereoping Germany, Hattingen 03/2015
