15
1.- Press the power button on the receiver’s front panel. The power LED on the
receiver will be on.
2.- Adjust the receiver’s volume controls to
approximately 50%.
3.- Switch the microphone’s or/and transmitter’s
power button to the ON position.
4.- Extend the receiver’s antennas, and place them in a position where they can
receive the signal from the microphones.
5.- Talk or sing into the microphones. During normal operation, the RF signal
LED’s will light on when a microphone is being use, if there are peaks the AF
LED will light on.
6.1 Operations
POWER
CH A
RF
VOLU
POWER
CH A
RF
RF
AF
AF
VOLUME
CH B
VOLUME
