5
PROBADOR DE DIODO Y TRANSISTOR
Rango
Condiciones de
prueba
Precisión
hFE
lb=10 uA y
Vce=2,8 V
Transistores NPN y PNP con un
rango entre 0-1000
2. INSTRUCCIONES
Si al encender el multímetro aparece en la pantalla
el mensaje “LOBAT” o “BAT”, deberá reemplazar
la batería.
Antes de realizar cualquier medición elija el rango
correcto.
Mediciones de voltaje en CD y CA
1. Conecte la punta roja a “V/Ω” y la negra a “COM”.
2. Gire la perilla central al rango correcto de voltaje
de CD o CA y realice la medición. Si aparece en la
pantalla “1”, el voltaje medido excede el rango
seleccionado. Elija un rango más alto.
Si no sabe el valor del voltaje a medir, se
recomienda usar el rango más alto.
Cuando una de las puntas no esté bien conectada,
aparecerá una lectura entre los rangos 200 mA y
2 V, lo cual es normal. La lectura es cero cuando
existe un circuito abierto.
Summary of Contents for MUL-010
Page 21: ......