Steren CCTV-210, User Manual, Page: 6 / 142

Rear Panel
1. Network Cable Connector
The Internet Camera’s rear panel features an RJ-45 connector
for connections to 10Base-T Ethernet cabling or 100Base-TX
Fast Ethernet cabling (which should be Category 5 twisted-pair
cable).
The port supports the N-Way protocol and “Auto-MDIX” function,
allowing the Internet Camera to automatically detect or negotiate
the transmission speed of the network.
2. Reset Button
Reset will be initiated when the reset button is pressed once, and
Power LED begins to
fl ash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to
light up. Release the reset button and the Power LED will begin
to
fl ash, indicating the Internet Camera is changing to fac-
tory reset. The IP address will return to the default setting as
192.168.0.20.
ENGLISH
ENGLISH-6
1
2
3
Network cable connector
Reset button
DC power connector