18
MAINTENANCE AND CLEANING
• The high temperatures may damage the tip, use the low temperature.
• Clean the tips with the sponge, since can to form oxides and waste.
• Adjust the knob in 250 °C (482 °F) and wait until the temperature is established to can clean
the tip.
• If there are black oxide in the tip, apply new soldering and rub it with a clean sponge. Then,
cover the tip with new soldering.
• If the tip is deformed or eroded, replace by a new one.
Disarm the soldering to replace the tip or the thermal element
Retention nut
Tip
Spring
Base nut
Thermal element connector
Soldering handle with the
thermal element
Cap
Summary of Contents for CAU-265
Page 1: ...1 Caut n profesional de estaci n Manual de instrucciones V1 0 0219v...
Page 11: ...11 SOLDERING STATION User Manual V1 0 0219v...
Page 21: ...21...
Page 22: ......