BL-526-108 Optical Power Meter
36
. Software Troubleshooting
Issue
Reason and analysis
Solution
Clicking
“Connecting
Equipment
”
fails
1. Physical
connection is not
good.
2. The power meter
did not install the
device driver.
3. The power meter
is not on.
1. Please check the physical
connection between the
computer and the optical power
meter.
2. Check whether the power
meter has device driver (see
Appendix 1A)
3. Check whether the power
meter is on.
Data uploads
or set-ups are
unsuccessful
The standby time of
power meter
is due, and then the
meter is power off
automatically.
Restart optical power meter and
follow instructions in Appendix 1A
until a successful connection is
obtained.
Reconnection
fails after a
normal
disconnection
After disconnecting
the equipment, the
computer
’s serial
port is in a
connecting state,
but equipment isn
’t
found, and
connection is
unsuccessful. This
occurrence is rare.
Exit the software and reopen.
Then restart the meter and try to
connect again.
