BL-526-108 Optical Power Meter
5
5. Operation
1. Turn On / Turn Off
•
Press and hold the
button for 3 seconds to turn
on the Optical Power Meter. The Home display will
appear as shown below. (Fig. 02)
Fig. 02
•
Auto Power Off mode is enabled when the meter is
first turned on. The default idle setting for the
Auto-Off function is 10 minutes.
•
The display will indicate in the lower-left corner if the
Auto-Off function is enabled (Fig. 02)
•
To disable Auto-Off, hold the
button for 3
seconds. To re-enable Auto-Off, hold the
button
again for 3 seconds and check the display.
•
Press the
button to turn off the meter.
Auto-OFF
