Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
Product: 32 dB omnidirectional HDTV antenna
Part number: ANT-HD 150
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please give a call to our Call Center.
01 800 500 9000
H I G H L I G H T S
C O N T R O L S
I N S T R U C T I O N S
C O N T E N T
S P E C I F I C A T I O N S
T R O U B L E S H O O T I N G
H O W T O U S E
I M P O R T A N T
The flat omnidirectional outdoor antenna has a special design that helps you
capture digital and high definition (HDTV) signals. It is easy to install and includes all
fittings and accessories necessary for mounting.
Includes a voltage inserter that feeds the integrated booster, its internal circuits allow
you to filter, amplify and process the signal to get high quality image without the need
for adjustments or complicated installations.
• Outdoor Antenna with amplifier.
• UHF/VHF/FM reception.
- Power inserter
1. Female F type connector. Allows you to connect to the antenna.
2. Power input. Connect the included power adapter.
3. Male type F connector. Connect the coaxial cable from the power inserter to the TV.
- Antenna
4. Female F type Connector. Connect the coaxial cable that comes from power
inserter to the antenna.
5. Fixing base: Use to fix the antenna.
1 Antenna.
1 Power inserter.
6 Butterfly type nuts.
2 11/8” screws.
2 Type U screws.
1 Antenna base (A).
1 Antenna gripper arm (B).
2 Antenna fixing parts (C and D).
1 Power adapter.
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
Product design and specifications are subject to change without notice.
1. Place gripper arm (B) into the base
located at the antenna. Point it at your
convenience. Adjust the butterfly type nut.
2 Hold the (A) piece to the gripper arm (B).
Adjust the base as you need. Tight the
butterfly nut.
3. Insert the U type screws into the holes.
Then place C and D parts to mount the
antenna in the desired location. Place the
nuts and adjust.
To receive a
good signal, is
important to place the antenna in
horizontal
position (as shown in picture).
1. Insert the coaxial cable into
the antenna, the other end to
power inserter.
2. Connect the power inserter
to TV.
3. Plug the power converter to
an electrical outlet and insert the
other end to power inserter.
4. Turn on your TV.
5. Search for digital channels.
Remember that your TV must have digital tuner to receive digital or HD signals.
Trouble
Solutions
There is no good signal
on TV.
Verify that the coaxial cable is correctly connected to
TV.
There is no image on
TV.
Check that the antenna feeder cable is connected to
an electrical outlet.
Check that the coaxial cable is connected to TV and
antenna.
Reorient the antenna.
Power inserter
Input: 12 V 50 mA
Operation frequency: VHF 174-230 MHz, UHF 470-862 MHz, FM 87-108 MHz
Gain: 32 dB (UHF), 28 dB (VHF), 25 dB (FM).
Converter
Input: 120 V~ 60 Hz 3.5 W
Output: 12 V 50 mA
