SteppIR Antennas — 2E - 3E High Wind Kit
i
The high wind kit for the 2 and 3 element Yagis will consist of additional hardware to provide a stronger and
more secure mounting in environments where severe winds may be a problem.
This will be a pictorial description of the assembly of this kit:
Put the two mast plates together making sure all the holes line up
Put a split washer on the 3/8-16 x 4” SS Full-Thread Bolt
Insert the 3/8-16 x 4” SS Full-Thread Bolt through the two plates as seen in
Picture 1
&
Picture 5
Install a standard 3/8-16 nut and tighten (make sure all holes align)
Install a standard 3/8-16 Nylok nut as seen in (
Picture 7
)
Picture 3
Mast Side
This Edge TOP
Picture 1
Boom Side
This Edge TOP
Picture
Picture
