SteppIR Antennas — 2E - 3E High Wind Kit
i
Picture
3/8-16 x 4 SS Full Thread
Bolt W/Split Washer
2” Mast
Saddles
If you are going to mount the mast plate to a temporary mast then continue your antenna assembly:
Put the mast plate assembly against the mast
Assemble a reinforcing strap with two 5/16-18 x 4” SS bolts into a 2” short saddle (with center
hole) and install as seen in (
Picture 13
).
Install the 5/16-18 SS Nylok nuts and tighten
Repeat for second mast clamp
Picture
2” Mast
Picture
2” Mast
