Stephen Technologies Co.,Limited SVP303 SIP / H.323 ip phone user manual
14
1 [enable]
If you need to register at Gate Keeper to call the outside, ENABLE and a
communication protocol need to be selected.
Select DISABLE for the point-to-point calling in LAN.
3 Service Type Common is defaulted; (No service is needed); has 11 options:
0 [common] No service is needed
1 [mediaring]
2 [etalk]
3 [auvtech]
4 [subcentrex]
5 [ringtec]
6 [smartcon]
7 [dda]
8 [vida]
9 [citron]
10 [asiasoft]
The related service provider is selected according to the service system used.
4 Service Addr: Provided by service provider.
5 Service Id: Provided by service provider.
When the protocol server needs ID, please input the related ID.
6 Register Port : 1720 is defaulted.
Connect the telephone to the port of server.
Port of server is:
The target port of register information sent by telephone and monitor port of GK
The different settings depend on different communication protocols. When n2p used,
the port needs no setting; while when other protocols used, register port needs to be
set. Service provider supplies the setting.
7 Register Cycle: 60 is defaulted.
IP address of the telephone may be changed. Server will receive the notice of
register update after an interval of time.
8 Signal Port: 1720 is defaulted; usually supplied by service provider.
Port for reciprocal calling command; when H323 protocol used, this port
corresponds to Q.931 port. The port number can be set among 1024—65535.
9 Control Port: 1722 is defaulted, which is usually supplied by service provider.
When H323 protocol used, this port corresponds to H245 port. Calling control
information is defined in H245 protocol.
When TCP protocol used, the port number can be set among 1024—65535.
10 Rtp Port: 1722 is defaulted, which is usually supplied by service provider.
It is the port for voice flow transmission and receiving, UDP protocol is used.
The port number can be set among 1024—65535.
11 Rtp Tos: 0 is defaulted.
Set the TOS, the field of IP head in RTP data flow; the parameter can be set
among 0—255.
For the detailed settings, please refer to related instruction of IP protocol.
12 Register Type: PHONENUMBER is defaulted
The mode used by the caller (user of the telephone) to GK.
