Stephan 161061000 Operating And Service Instructions Download Page 12 | Manualshive

Page: 12 / 15

Stephan 161061000 Operating And Service Instructions Download Page 12

7 Care and Servicing

12

Operating

Instructions

MedAir

, February 2007

7.

Care and Servicing

7.1. Cleaning

For reasons of hygiene, the unit should
regularly be cleaned with a wipe disinfectant
using a commercially available household
detergent or disinfectant (e.g. Sagrotan).

The intake filter matting and the bacterial
micro-filter must be replaced every 6 months or
after every 500 operating hours.

The intake sound damper should be replaced
when found dirty or at least every 6 months.

7.2.

Safety technical inspections

Safety technical inspections as well as
checking the quality of air generated are to be
carried out annually or after 3500 operating
hours by the manufacturer or by the authorized
Technical Support team of F. STEPHAN.

7.3. Servicing

For reasons of safety, it is recommended that
the servicing of the

MedAirs

be carried out

annually in conjunction with the safety
technical inspections.

Servicing is to be carried out only by the
authorized Technical Support team of F.
STEPHAN.

Only original replacement parts supplied by F.
STEPHAN are to be used.

«
...
10
11
12
13
14
...
»

Summary of Contents for 161061000
















Reviews:

No comments