11
Viewing the programmes that you have selected
- From Auto, Comfort, Eco or Frost
protection mode, press
for 5 seconds. Press
twice, the programme for each day
of the week (Comfort, Eco, P1, P2 or P3) will scroll on display in
front of you.
- To exit the programme viewing mode, press
twice.
Manual and temporary exemption from a running
programme
This function allows you to change the setting temperature tem-
porarily until the next scheduled change in temperature or the
transition to 0:00.
Example:
1-
The device is in Auto mode, the running programme is Eco
15,5°C.
3
3-
This change will be automatically cancelled at the next
change of programme or transition to 0:00.
3
2-
By pressing
or
, you can change temporarily the
desired temperature up to 18°C for example.
OPEN WINDOW DETECTION, ENERGY
SAVINGS
Important information about the open window
detection
Important:
the open window detection is sensitive to tempera-
ture variations. The device will react to the window openings
in accordance with different parameters: temperature setting,
rise and fall of temperature in the room, outside temperature,
location of the device...
If the device is located close to a front door, the detection may
be disturbed by the air caused by opening door. If this is a pro-
blem, we recommend that you disable the automatic mode
open window detection
(see page 17)
. You can, however, use
the manual activation (see below).
2
1
Legend
= the favoured
location
= another location
Overview
Lowering temperature cycle by setting frost protection during
ventilation of a room by opened window. You can access the
open window detection from the Comfort, Eco and Auto mo
-
des. Two ways to enable the detector:
- Automatic activation,
the lowering temperature cycle starts as
soon as the blower detects a temperature change.
- Manual activation,
the cycle of lowering temperature starts by
pressing a button.
Automatic activation (factory settings)
To disable this mode,
see page 17.
The device detects a temperature fall. An opened window, a
door to the outside, can cause this temperature fall.
Note:
The difference between the air from the inside and the
outside must cause a significant temperature fall to be percep
-
tible by the device.
This temperature drop detection triggers the change to Frost
Protection mode.
Frost protection digital meter
When the device performs a lower temperature cycle due to
opened window, a meter appears on the display to show the
cycle time.The counter is automatically reset at the next time
to Frost protection by opened window (automatic or manual
activation).
Stop the Frost protection mode
By pressing any button, you stop the Frost protection mode.
Note:
if a temperature rise is detected, the device may return
to the previous mode (active mode before the open window
detection).
Manual activation
By pressing
for more
than 5 seconds, the device
will switch on Frost protection
mode.
Note:
The cursor corresponding to the operating mode, i.e Eco
mode in our example, is blinking during the duration of the tem-
porary derogation.
3
Summary of Contents for E-VENTO 0184B0002
Page 26: ......
