Stelrad E-VENTO 0184B0002, User & Installation Manual

Page: 18 / 26

18
The OPTI COMFORT mode is activated by default.
Optimization choice
The word
OPTI
will appear briefly on the display then it will al -
ternate with the set mode
CONF
,
ECO
or
OFF
.
1- Press or .
CONF
= Optimisation feature activated for OPTI COMFORT
mode, priority to comfort.
ECO
= Optimisation feature activated for OPTI ECO mode,
priority to energy efficiency.
OFF
= Optimisation feature deactivated.
2- To save and move automatically to the next setting, press
. To exit the user settings, press 3 times.
Overview
Your heating device is protected by a safety code against
nonauthorised use. The PIN code (Personal Identity Number) is a
customisable 4 numbers code. When enabled, it prevents
access to the following settings:
- Selecting the Comfort mode : The access to the Comfort mode
is forbidden, only the Auto, Eco and Frost protection modes
are available.
- Minimum and maximum Limits of the setting temperature
range (the Comfort temperature modification is forbidden out
of the authorised setting range).
- Programming mode.
- Open window detection settings.
- Setting the Eco mode temperature lowering-level.
- Setting the Frost protection temperature.
- Optimization choice.
- Occupancy detection settings.
3 important steps are needed for the first use of the PIN code
lock:
1 - PIN code initialisation, enter the preset PIN code (0000) to
access the feature.
2 - Activation of the PIN Code to lock settings which will be
protected by the PIN code.
3 - Customizing the PIN code, replace 0000 by the customized
code
PIN CODE LOCK
PIN code initialisation
By default, the PIN code is not enabled. The setting access is
available in Standby mode only.
1- By default registered PIN code is 0000.
Press or to select 0. It is blinking. Save by pressing
.
The PIN code is initialized, the next setting automaticaly appears:
PIN Code activation.
1 2
2- For others numbers, select 0 by pressing .
When 0000 appears, press on again to save and exit.
Activation/deactivation of the PIN Code
The PIN code is enabled. Any modification of reserved settings
listed in "Overview" is now impossible.
2- Press to save and return to the home installer settings
display.
1-
OFF
appears on the display.
Press or to enable PIN code.
ON
appears on the display.
ON
= PIN code enabled
OFF
= PIN code disabled