1
2
8
INSTALLATION
WARNING
: The thermostat must be installed by a certified electrician.
TURNING THE POWER OFF
To protect yourself against electric shock, switch off the
power to the wires at the electrical panel. Then, make
sure the wires are no longer powered, e.g., checking that
the heating system remains off even when the setpoint
temperature is higher than the room temperature
(mechanical thermostat).
ATTACHING THE MOUNTING PLATE
1 -
Loosen the screw at the base of the Allia
thermostat, without completely removing it, until
the thermostat and the mounting plate are no
longer attached. Slide the mounting plate down
and away from the thermostat.
2 -
Using the mounting screws provided (2), attach
the Allia thermostat mounting plate to the
electrical box.
3 -
Pass the power supply wires through the large opening in the centre of the
mounting plate.
NOTE: You can place the mounting plate to the left, centre or right of the electrical box according to your needs
(see image). Make sure that the mounting plate is straight so that the thermostat is also straight.
