stellar labs Slider 20-S, Owner'S Manual

Page: 12 / 46

Page 6 | Stellar
®
Slider20-S Owner’s Manual
Note: See torque chart at beginning of chapter:
Step 4: Install tie-downs.
3
4
2
1
2
4
2 3
2
ITEM PART DESCRIPTION QTY.
1 D0143 TIE-DOWN CASTING 10
2 C5902 WASHER 0.63 SAE FLAT YELLOW GR8 40
3 C1025 CAP SCR 0.63-11X2.00 HHGR8 ZY 20
4 24868 NUT 0.63-11 HHGR8 NYLOCK ZY 20
PN 54848
• See NHTSA (National Highway
Truck Saftey Administration) Regu-
lations for acceptable placement.
• Modify the truck frame as neces-
sary so that it ends 2” from the rear
of the hooklift.
Step 3: Install bumper.
2.00
• Before drilling and bolting to the frame, confirm adequate room for cable routing be-
tween in-cab controls and the valve bank. Note: The top of the reservoir should not be
above the truck frame.
Step 6: Install hydraulic reservoir and valve bank.
See brand specific installation instructions.
Step 5: Install tarper tower (If applicable).