DMX Channel Allocations
6CH Mode
CHANNELS
VALUE
FUNCTIONS
1
0-255
Master dimmer
2
0-255
R 0-100%
3
0-255
G 0-100%
4
0-255
B 0-100%
0--10
No use
11-255
Sound active
0--9
No use
11-255
strobe(color strobe selected by 1CH-4CH),the big value,the higher strobe
frequency
0--255
Sound active sensitivity
6
5
Master / Slave Mode
Repeatedly press the
MODE
button until SLAv appears, this ensures the unit is in the slave mode. In this mode, all
internal programming is disabled and the unit will follow standard DMX-512 protocol. It may be controlled either by
another identical light fixture or by a standard DMX controller.
Test Mode
This mode allows the user to quickly verify that all three (RED/GREEN/BLUE) LED’s are operating properly. This is
especially useful in large setups when many light fixtures are installed, and need to be tested one at a time.
Repeatedly press the
MODE
button until tESt appears. The light will begin blinking one of its three colors. Press the
SETUP button once, then using the UP and DOWN keys, you can scroll through the three colors. Each color will strobe at
a fixed rate.
LED Display
Description
Red strobe
Green strobe
Blue strobe
Restore Factory Settings
With the unit powered off, simultaneously press the MODE and SETUP buttons. While holding them, power the unit on.
This will restore the original factory settings.
