ECO SPOT SELECT
LHT1058 BLACK / LHT1059 WHITE
Single 10W LED Spot Light
INSTALLATION INSTRUCTIONS
This product is suitable for use only with a supply voltage of 220-240V AC 50Hz.
All electrical work must be carried out in accordance with local and national electrical codes as applicable.
We strongly recommend that this light fitting is installed by a registered electrician.
Always switch power off prior to installation. A means of mains power isolation must be installed in the circuit
for the purpose of safe access for any internal cleaning, recalibration, or maintenance.
This light fitting is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Young children should be
supervised to ensure that they do not play with the appliance.
Any changes or modifications made or attempted to this product, or product installed contrary to these
installation instructions without the prior written approval of the manufacturer, will void any and all stated
warranties.
IMPORTANT
!
ECO SPOT SELECT
LHT1056 BLACK / LHT1057 WHITE
Twin 10W LED Spot Light
Thankyou for purchasing this Simx Eco Spot Select light fitting.
This product is suitable for sheltered exterior locations.
It requires a 230V AC power supply to operate and should be installed by a registered electrician.
TECHNICAL SPECIFICATIONS
Single Twin
Power Source
220-240V AC Class II
Rated Load
10W
20W
Lumens
3000K
900 lm
1800 lm
by Colour Temp
4000K
1000 lm
2000 lm
5000K
1000 lm
2000 lm
Protection Rating
IP54
Mounting
Ceiling or wall
Construction
Polycarbonate UV stabilised
Warranty
3 years
SIMX is proudly distributed by Ventair Pty Ltd
4 Capital Place, Carrum Downs, 3201 VIC, AUSTRALIA.
Technical Support: 1300 665 926
e: [email protected] | www.ventair.com.au | www.simx.com.au
230620
