Stell SHO 1020, Universal Mounting Instructions

Page: 7 / 52

7-EN
Wood Stud mounting:
The Wall Plate (a) must be mounted to two wood studs at least 16” apart. Use a stud
fi nder to locate two adjacent studs. It is a good idea to verify where the studs are located
with an awl or thin nail shown in Diagram 2B. Pre-drill a 2.5” deep hole at the desired
height in each stud using a 3/16” drill bit. Make sure these holes are in the center area of
the studs and level with each other. Attach the Wall Plate to the wall using the 2pcs Lag
Bolts (t) and 2pcs Lag Bolt Washers (u).
Diagram 2A Diagram 2B
Stud Finder
16 inch
16 inch
16 inch
Step 3 Attaching Monitor to Wall Plate
Warning : Some TVs may require two people to lift ! We are not responsible for
personal injury or product damage .
First hook the Monitor Brackets (b, c) over the top of the wall Plate (a), then let the bottom
of the Monitor Brackets rotated to the wall as shown in the Diagram 3A. Finally push the
each metal piece on the arms up and fasten the screws by screw driver, the
fi nishing
looking as shown in the Diagram 3B.
Diagram 3A Diagram 3B
wall
wall
Lock
system
Thanks for choosing our products, enjoy the using!