13 – EN
Mounting the brackets on the TV set
Warning:
Before you start installing the TV brackets do not forget to fasten to the brackets
B
and
C
the
locking bolts
X
!
(
Fig. 4
)
TV set with flat rear wall (Fig. 5A)
First find the screws suitable for mounting the TV (
E
/
F
/
G
/
H
): try to screw them manually into the holes
on the back of the TV.
If you feel resistance stop screwing in immediately!
Once you find the screw with the
correct threat proceed according to the drawing
5A
. Insert matching lock washer on the screw (
M
/
N
/
O
/
P
),
washer (
S
/
T
) and then screw the screw to the bracket
B
/
C
and then to the TV. Check that the brackets are
fastened vertically. They are mutually parallel and the locking bolts are facing towards the outer edge of the TV.
TV set with curved rear wall (Fig. 5B)
First find screws suitable for mounting the TV (
I
/
J
/
K
/
L
) with a suitable spacer (
Q
/
R
): try to screw them
manually into the holes in the back of the TV.
If you feel resistance stop screwing in immediately!
Once
you find the screw with the correct threat proceed according to the drawing
5B
. Insert matching lock washer
on the screw (
M
/
N
/
O
/
P
), washer (
S
/
T
) and the screw the screw to the bracket
B
/
C
, insert spacers
(
Q
/
R
) and finally, screw them to the TV. When using screws with thread M4 and M5 you will need to insert
between the bracket and the spacer another washer M4/M5 (
S
/
T
). Check that the brackets are fastened
vertically. They are mutually parallel and the locking bolts are facing towards the outer edge of the TV.
Attachment of the TV set to the holder and securing it using the safety rod
Warning:
Handling some TV sets requires help of another person. The manufacturer is not liable for injury or
damage to property caused by improper handling!
First, hook the bracket attached to the TV (
B
+
C
) on the top edge of the wall plate
A
, then put the lower
part of the brackets to the lower part of the wall plate (
Fig. 6
). Insert the safety rod
D
in the holes in the
bottom part of the wall plate so that it is placed behind the rear frame of the wall plate. (
Fig. 7
). You can assure
additional safety by securing the rod using a standard padlock.
Congratulation, the installation is done. We wish you a pleasant experience while watching TV mounted on
the wall mount.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
Take the used packaging material to the municipal waste disposal.
PRODUCT DISPOSAL AFTER END OF LIFE
Dispose of equipment after the end of life in the designated municipal solid waste place
This product meets all the basic requirements of EU directives that apply to it.
