46
STEL s.r.l.
– Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: [email protected]
http: www.stelgroup.it
MAX 503 IP54 - ATX
COD. 6913000050
5.0
5.0
5.0
5.0 ---- PREPARING THE GENERATOR
PREPARING THE GENERATOR
PREPARING THE GENERATOR
PREPARING THE GENERATOR
-
The procedures for safety at work must always be carried out with attention.
5.1
5.1
5.1
5.1 ---- DESCRIPTION OF THE WELDING FUNCTIONS
DESCRIPTION OF THE WELDING FUNCTIONS
DESCRIPTION OF THE WELDING FUNCTIONS
DESCRIPTION OF THE WELDING FUNCTIONS
- Switching on the MAX 503 IP54-ATX generator: turn the ignition key to position 1 (ref.7 page
47) .
- Switching off the MAX 503 IP54-ATX generator: press the OFF button (ref.9 page 47).-
When the generator is switched on, all the warnings will be displayed for about 2 seconds; then
the display (ref.4 page 47) will show the set welding current.
5.2
5.2
5.2
5.2 ---- ELECTRODE WELDING (ARC)
ELECTRODE WELDING (ARC)
ELECTRODE WELDING (ARC)
ELECTRODE WELDING (ARC)
1) The machine live led (ref.1 page 47) is lit.
2) The arc lit led (ref.2 page 47) is enabled.
3)
Regulating the welding current
Use the encoder
A
(ref.11 page 47) to regulate the welding current which will be shown on the
display (ref.4 page 47). The current may be regulated from 4 to 500A.
4) The Hot-Start function is already automatically regulated to have optimum welding.
5)
Regulating the Arc-Force function
The function is accessed by turning the encoder for regulating the Arc-Force (ref.10 page 47).
The blinking letters A.F. appear on the display and then the value which can be varied from 0 to
500% of the set welding current. 3 seconds after the end of regulation the display again shows
the set welding current.
6
) Displaying the welding voltage
During welding the display (ref.4 page 47) automatically shows the real welding current: to
display the welding voltage press the button
V
(ref.5 page 47); the led (ref.6 page 47) blinks
intermittently. To exclude the voltage display press the button
V
(ref.5 page 47) .
TECHNICAL
DESCRIPTION
ENGLISH
Summary of Contents for MAX 503 IP54-ATX
Page 75: ......