Source Setup
In the
Source Setup
menu, you register the individual sources connected to the Model P1 by the
audio and/or video input sockets they use. Add new sources, edit existing sources, arrange them in a
prioritized list, or delete them when they are no longer part of the system. This procedure must be
followed for all connected sources to facilitate access.
In the
Source Setup
menu, press the down arrow button on the Installer remote control to highlight
Create New
and press
OK
to bring up the menu. In the Web interface, click
New Source
.
Press the down arrow button to highlight the name field and type the new name for the source. In the
Web interface, click the name field and type the new name. Select the audio input (and video input if
relevant) for the specific source by highlighting the input fields, and pressing the left or right arrow
buttons until the input is shown. In the Web interface, click the down arrow next to the input field and
then click the input from the drop-down list.
To select a special audio processing mode or adjust the level offset for the specific source, select
Advanced…
in the
Edit
menu and use the left or right arrow buttons to change the settings. Audio
modes are described in the next section.
21
