User manual |
Orbit 3100/3300/3500/3400/3600 Camera
9
6
SERVICE OF CAMERA
6.1
Routinely maintenance
Daily:
1. After use, park the camera at 15m deep, with the lens facing down, to reduce sludge/fouling
the lens.
Weekly:
1. Check the winch rope for fouling and mussels to prevent the camera rope breaks and ensure
that the winch rope runs smoothly.
2. Wipe the entire camera, pay special attention to the lens on the camera and the sensors.
3. Wipe the membrane of the sensor station (Use soft cloth/cotton buds to avoid damage of the
membrane).
Monthly:
1. Check the attachment to cage; check that the bolts and fixing are fastened.
2. Check the strain relief, suspension rings, ropes and blocks are in good condition.
3. Check cables for kinks and damages.
Recommended service interval:
1. Camera: each generation
2. Winch and PSU: Every other generation
Else, if necessary:
1. Calibration/ exchange of oxygen film if needed/damage (estimated life without damage: about
5 years).
