Steinsvik Orbit 3100, User Manual, Page: 4 / 13

User manual | Orbit 3100/3300/3500/3400/3600 Camera 4
2 INTRODUCTION
2.1 Description
The Orbit-3000 camera system is an advanced surveillance system for controlling fish feeding in
aquaculture, and for general inspection of fish in cages.
The system’s main component is an underwater camera with pan and tilt function:
Orbit-3100 – Camera with pan/tilt, with sensors but not activated
Orbit-3300 - Camera with pan/tilt, sensors: Temperature, depth and compass (TDC).
Orbit-3500 - Camera with pan/tilt, sensors: TDC and Oxygen.
Orbit-3400 – Camera pan/tilt, sensors: TDC.
Orbit-3600 – Camera pan/tilt, sensors: TDC, oxygen.
Additionally; Orbit-200 and Orbit-210 - surface, color camera with zoom. This is mounted on the edge
of the cage.
The cameras are powered and controlled by a PSU by the cage edge. In addition, the Orbit-3100,
Orbit-3300 and Orbit-3500 can be powered by a control desk, KB6000, which is connected to a 230V
AC and conveys low power and control signals to the connected camera. The Orbit-3100, Orbit-3300
and Orbit-3500 cameras can also be connected to a MB3000 portable control unit, which has a built-in
screen, joystick and 12V power to the camera.
For camera connection for these systems, see each systems user manual.
2.2 Contact information
Main number:
+47 52 75 47 00 post@steinsvik.no
Service:
+47 48 85 28 88 service@steinsvik.no
Support: +47 48 85 24 88 support@steinsvik.no
Support Mercatus: +47 57 75 22 90 support.mercatus@steinsvik.no
Post:
Steinsvik AS
Rundhaug 25
N-5563 Førresfjorden
Norway
3 HEALTH AND SAFETY
3.1 Recommendations and reservations
In case of new installation by Steinsvik AS, the equipment is checked before and after installation to
eliminate danger of persons and fish.
When reconnecting equipment (with new generation) is it important to ensure the installation and
equipment are in accordance with the specifications given by Steinsvik AS. The user will not cause
any contamination for the fish.
The underwater cable’s contact surface is applied Molykote 44 or Molykote 111 to prevent intrusion of
moisture. The camera body’s external contact surface consists of POM, with some parts of stainless
steel and tempered Sikaflex to prevent fouling on the assembling screw.