18
SETTING THE TEMPERATURE
• Insert the plug in the wall socket and stand the iron upright.
• Turn the temperature control dial (1) to the desired temperature setting.
• The desired temperature has been reached when the pilot light has turned off. The pilot light will
turn on and off from time to time, indicating that the selected temperature is being maintained.
SPRAYING
This function can be used any time and it does not affect the ironing temperature.
• Fill water into the iron as described on page 3.
• Aim the nozzle towards the garment.
• Press the spray button (3).
STEAM IRONING
This function can be used only at higher ironing temperature.
••
for moderate steam
••• or MAX for maximum steam
• Fill water into the iron as described on page 3.
• Stand the iron upright.
• Connect he iron to a suitable mains supply outlet
• Turn the temperature control dial(1) to the “••”, “•••”or MAX setting
• The pilot light turns off when the required temperature is reached. The iron is ready for use.
• Turn the steam control knob(7) to the required position, steam starts coming out from the holes
in the sole plate.
Notice: With conventional steam ironing ,water may leak from the sole plate if too low a
temperature has been select. If this happens, turn the temperature control dial(1) to the advised
position. Steam will recommence as soon as the appropriate temperature has been reached.
BURST OF STEAM
This function provides an extra amount of steam to remove stubborn wrinkles.
• Fill the iron with water as described on page 3.
• Turn the temperature control to the position “MAX”
• The pilot light turns off when the required temperature is reached
• The iron is ready for use
• Press the Burst of Steam button (2) once
• Steam will penetrate into the garment removing the wrinkles
• Wait a few seconds before pressing the steam control knob again when there are stubborn
wrinkles
Usually all wrinkles can be removed within three pressings
DRY IRONING
• Connect the iron to a suitable mains supply outlet.
• Ensure that the steam control knob(7) is in position”0”
• Select the setting on the temperature control dial(1).
• When the pilot light turns off, the required temperature is reached. The iron is ready for use.
ANTI-SCALE SYSTEM
Your iron contains an anti-scale cartridge to reduce scale deposits.
This considerably prolongs the operational life of your iron.
The anti-scale cartridge is an integral part of the water tank and does not to be replace.
IRC_100_user_manual.indd 18
IRC_100_user_manual.indd 18
24.6.2011 14:59:17
24.6.2011 14:59:17
