- 20 -
Button input
Push-buttons can be integrated and con-
figured via the STEINEL Connect app. In
addition to input S, further push-buttons
can be assigned to the sensor from the
BT Mesh network. A function can also
be assigned to each of these buttons.
A pushbutton with the "ON / OFF"
function provides the option of switching
lighting ON and OFF by hand. However,
the "ON" function cannot be used for
switching light OFF again. In this case,
the stay-ON time is re-started each time
the button is pressed. The "OFF" function
can only be used to switch lighting OFF
manually. "ON x min" and "OFF x min"
functions are also available that can be
used for switching lighting ON or OFF for
a defined period of time. A pushbutton
is required for operating the sensor in
semi-automatic mode.
Pulse mode
The pulse function activates the output
for 2 seconds (E.g. for an automatic stair-
case lighting time switch). The sensor will
then be in a dead time for 8 seconds.
Steinel Connect App
To read off the sensor via smartphone
or tablet, you must download the Steinel
Connect app from your app store. You
will need a Bluetooth-capable smart-
phone or tablet.
Android
iOS
Bluetooth interconnection
(Bluetooth Mesh)
The sensor switch complies with the
Bluetooth Mesh standard. It can be inter-
connected with all products complying
with the Bluetooth Mesh standard.
The sensor switch is configured via
the Steinel Connect app. Appropriate
network keys are saved on a smartphone
or tablet the first time a connection is
made between the sensor switch and
Steinel Connect app. The key rules out
any unauthorised access to
the sensor.
The network key must be shared for
access via another smartphone or tablet.
LED function
Starting up:
The LED flashes white
slowly for 10 seconds
Initialisation:
The LED lights up blue
permanently
Normal mode:
LED OFF
Identification:
The LED flashes blue slowly
Error:
The LED flashes red rapidly
Teach-IN successfully completed:
The LED lights up green for one second
No application available:
The lights
up in cyan permanently
Movement test mode:
The LED flashes green rapidly
Firmware update:
The LED flashes
cyan rapidly
