5. Installation
Hazard from electrical power.
Touching live parts can result in electrical shock, burns
or death.
•
Switch OFF power and interrupt power supply.
•
Using a voltage tester, check to make sure that the
power supply is disconnected.
•
Make sure power supply remains interrupted.
Risk of damage to property!
Mixing up connection leads may produce a short circuit.
•
Identify connection leads.
•
Connect the leads correctly.
Preparing for installation
•
Check all components for damage. Do not use the
product if it is damaged.
•
Select an appropriate site to install the product.
–
Take range into consideration.
–
Take motion detection into consideration.
–
Vibration-free.
–
No obstacles in detection zone.
–
Not in explosive atmospheres.
–
Not on normally flammable surfaces.
– 43 –
Summary of Contents for Multisensor Air BT IPD
Page 30: ...30 Inhalt...
Page 31: ...31 Inhalt...
Page 59: ...59 Contents...
Page 60: ...60 Contents...
