STEINEL IR Quattro HD-2 IP, Manual

Page: 15 / 19

- 14 - - 15 -
5. Installation
• Check all components for damage.
• Do not use the product if it is damaged.
• Select an appropriate mounting
location, taking the reach and motion
detection into consideration. (FIg. 3.7)
Mounting procedure
Concealed mounting
• Make plug connection. (Fig. 5.1)
• Firmly screw load module into mount-
ing box. (Fig. 5.2)
• Fit magnetic sensor module on frame.
(Fig. 5.3)
• Make settings.
➜
"6. Function and settings"
Surface mounting
• Mark drill holes and drill.
(Fig. 5.4)
• Feed through cable. Screw load
module into place. (Fig. 5.5)
• Make plug connection. (Fig. 5.6)
• Break out the mounting tab. (Fig. 5.7)
• Fit surface-mounting adapter.
(Fig. 5.7)
• Fit magnetic sensor module. (Fig. 5.8)
• Make settings.
➜
"6. Function and settings"
6. Function and settings
Factory settings
The factory settings are activated when
the presence detector is put into oper-
ation for the first time as well as after
resetting by the app.
The following factory settings are
provided:
Sensitivity: Sensitivity A: 100%
Sensitivity B: 100%
Sensitivity C: 100%
Sensitivity D: 100%
Technical specifications
– Dimensions (H × W × D):
Concealed (UP): 103 × 103 × 72 mm
Surface-mounted (AP):
123 × 123 × 64 mm
– Power supply:
standard PoE (IEEE 802.3 af)
Passive PoE (24-55 V) SELV
– Mounting height: 2.5 - 10 m
– Angle of coverage: 360°
– IR-Quattro HD-2 reach
(mounted at a height of 2.8 m):
presence 9 × 9 m
max. 24 × 24 m
– Sensor values: Light measurement,
Temperature: 0-40°C,
Relative humidity: 0-100%
– Temperature range: 0°C to +40°C
– IP rating: IP20
– Bluetooth frequency: 2.4-2.48 GHz
– Bluetooth transmission power:
5 dBm/3 mW
4. Electrical connection
Surface-mounted connection (Fig. 4.1)
Concealed connection (Fig. 4.2)
Connection is made via the LAN cable.
Standard PoE (IEEE 802.af)
Connection examples for IP
– Connecting a single sensor to a PC via
a network power adapter (Fig. 4.3) .
– Connecting several sensors to a
switch with POE functionality for
access to PC (Fig. 4.4) .
– Integrating several sensors into a net-
work infrastructure via a switch with
POE functionality (Fig. 4.5) .
GB