UL WARNING.
Read this instruction booklet before using. To reduce risk of fire
or shock, do not expose to rain or moisture. Store indoors. When servicing, use
only identical replacement parts. When using electric tools, basic safety
precautions should always be followed to reduce the risk of fire, electric shock
and personal injury.
Congratulations on your purchase of a
HiPURformer™
polyurethane reactive hot melt
adhesive applicator. You have chosen a high quality product that has been
manufactured, tested and packed with the greatest care.
Please read these operating instructions carefully before using your adhesive
applicator and retain them for future reference. With proper care and use, the
HiPURformer™
adhesive applicator will provide you with years of satisfaction.
DOUBLE INSULATED TOOLS,
such as the
HiPURformer™
adhesive applicator, are
equipped with a two-prong plug. These tools have a special insulation system that
complies with both UL and CSA requirements. They do not require grounding.
OPERATING INSTRUCTIONS
Read operating instructions thoroughly before using adhesive applicator.
WARNING: Eye and Skin Irritant. Potential Skin and Respiratory Sensitizer.
Caution: Contact with heated product may cause thermal burns. Always wear
gloves.
Contains isocyanates. Avoid contact with skin and eyes. Avoid prolonged or
repeated contact with vapors. Do not swallow. May be harmful if swallowed.
First Aid:
If swallowed, do not induce vomiting. Call physician immediately. If eye contact
occurs, flush eyes with water for 15 minutes and call physician. In case of skin
contact, wash skin with soap and water. Seek medical attention if sensitization or rash
occurs. If inhaled, move to fresh air and contact physician. For additional safety
information, refer to Material Safety Data Sheet or call 1-800-347-4583.
KEEP OUT OF
THE REACH OF CHILDREN.
When using a hot air gun to remove adhesive, remain in a well-ventilated area. Do not
over-heat flammable materials or substrates susceptible to thermal damage.
The
HiPURformer™
adhesive applicator is designed for use with
HiPURformer™
polyurethane reactive hot melt adhesives only. Operation and performance are NOT
guaranteed with any other hot melt products.
IMPORTANT SAFETY INSTRUCTIONS
C
US LISTED
UL
R
3