www.autani.com
www.autani.com
2
3
Autani HBS-DC Wireless System
Intended uses
• For indoor use only
• For individual fixture lighting control
with grouping (zone control) capability
• HBS 200 or HBS 300
• HBS-DC
• Two 1/2” KO locknuts
• Installation instructions
• HBS-DC Radio Module
Needed for installation
• Wire nuts for termination
Applications
• HBS 300 with installed HBS-DC: Open
areas where 360 degree coverage and
wireless control is desired, such as
in warehouses, distribution centers,
gymnasiums
• HBS 200 with installed HBS-DC: High
bay aisle ways where aisle coverage
and wireless control is desired
Package Contents
Installation Overview
WARNING
• Turn power off at the circuit breaker before installing the sensor
• Sensor must be installed and used in accordance with appropriate electrical codes
and regulations
• Installation by a qualified electrician is recommended
Communication
Frequency
Transmission Range
2.4 GHz
600 ft (182.8 m) depending on line of sight. Range may be less
if signal needs to pass through obstacles.
Autani HBS-DC
Wireless System Specifications
Autani wireless lighting control devices work
together to create groups (or control zones)
without the need for additional wiring.
The devices are RF based, operating at a
frequency of 2.4 GHz.