Liability, warranty and copyright notice
Liability, warranty and copyright notice
Definitions
"Device": A product that can be operated by simple connection via a power supply to the home power net. The power adapter does not have to
be included.
Liability
Although the information contained in this document has been checked very carefully for accuracy and completeness, for errors and
omissions can not be held liable. StefPro reserves the right to any time change any portion of the described hardware and software features.
StefPro provides only specific "module" which is intended for installation. The "Manufacturer of the whole device" obliges to compliance to
the relevant valided VDE, CE and EMC regulations. StefPro has verifies compliance with the requirements for this module random.Because the
installation is not performed by StefPro, must additional inspection after installation of the modules by the "Manufacturer of the whole
device".
There is no liability for damages incurred directly by or in the application of the "module", as well as for damage caused by chemical or
electrochemical effects of water or generally from abnormal environmental conditions.
"Device" by StefPro should not be used in critical areas."
These include:
medical devices for implanting or life obtained.
Critical equipment for space, aerospace and traffic.
Other important life components or systems, where an error is fatal.
Safety Notes
Since the built device is operated with an electrical voltage, the valid VDE regulations are complied with.
This device is not in the hands of children!
The device complies with the requirements of protection class III.
The "device" may NOT directly to line voltage (or voltage > maximum operating voltage) in any case! It can be fatal!
Whenever it is that safe operation is no longer possible, the device must be taken out of service and secured against inadvertent
operation. This assumption is justified,
when the device has visible damage,
when the device has loose parts
when the device no longer works
after prolonged storage under unfavorable conditions (eg outdoors or in moist environments)
Watch for correct voltage and connection of the device voltage and / or connection mistakes are beyond our control. Thus we can not assume any
liability for damages arising out of it.
Intended operation
The used electrical parts and components are designed for a temperature between 0 °C ... +45 °C, so the device may only be operated and
stored in this temperature range. During transport, the temperature may be between -10 °C ... + 50 °C.
If condensation has formed during transport or storage, the modules must be acclimatized for approx. 2 hours before commissioning.
It must not be operated in an increased dust, high humidity, explosion risk or aggressive chemical exposure.
Ensure proper operation and connection. Operating and/or connection errors are outside our area. Unfortunately, we can not accept any
liability for damages resulting of this.
The improper operation of this module may result in damage of this module, personal injury or property damage.
The safety instructions must be observed!
The manufacturer is not responsible for all personal injury and property damage caused by improper operation.
Warranty
StefPro only warrants the device and its firmware. The warranty is limited to the exchange of the device within the warranty period in case of
obviousdefects of the hardware, as well as faulty programming.
Warranty does not extend the warranty period or starts a new period again.
Additional or deviating claims are excluded, especially claims for damages arising out of the product for damage. This will not affect claims
based on inalienable rules under the product liability law.
StefPro - www.stefpro.biz - [email protected] - SPDv2133.01
13.01.2018
Liability, warranty and copyright notice - Definitions
Page 22 of 24