Set day
Set the day, limit by month.
The number can be 1- 28, 29, 30, 31.
MISSING: MENU_CODE_L2_DATECLOCK_GET_WDATE
Set time
Sets the time, while looking for DCF time, otherwise the time will be
provided directly.
Exit clock settings
With + you exit the sub-menu clock. Until here the clock, without DCF
synchronization, will be taken and used until the next scheduled
synchronization.
Info section
This indicates the start the information area
IC number
Chip number
IC / device type
Firmware version
Firmware version
Firmware version
Example, it might be something else at this point.
StefPro - www.stefpro.biz - [email protected] - SPDv2133.01
13.01.2018
Button description - Info section
Page 17 of 24