7
4.
Cut a length of tube approximately 200mm long and connect one end to the mains
connection shut off valve and the other end to the inlet of the pressure limitng valve –
please ensure you check the flow direction is correct, otherwise water flow will be
restricted.
5.
Cut the next length of tubing to the required length to reach from the outflow of the
pressure limiting valve to the inlet of the filter housing, leaving enough flex so it is not
rigid tight, and so it can be tucked neatly out of the way. Please ensure you have
connected to the IN side of the filter housing.
6.
Use the remaining tube to connect from the outlet of the housing to the faucet, cut to
length if required
Summary of Contents for Triple Undersink
Page 1: ......
