3. A
fter step 2, press “
CD
I
S
kip down” button (12) again will go to the previous track and remain the play or pause mode.
4. I
f press and hold the “
CD
I
S
kip up/down button “ (12) during playback, the playing track will go fast forward or backward
until the button being released.
5. P
ress “
CD
I
folder up
“ button (14) to select your desire folder.
E-8
Encoding to MP3 file
The system is able to encode normal CD/Turntable/Aux in/Tape to MP3 format and recording at memory media with USB
connecting port or SD/MMC card. (Below explanation was perform USB encoding)
CD
I
encoding was recommended
Whole disc encoding
1.
Insert the USB media into the unit and made sure it had enough memory to perform encoding.
2.
Set the unit in
CD
I
mode by press
“
CD
I
“ button (21) and get ready to playback.
CD
I
/USB/SD operation display area
(2 ) will show the TOC of
CD
I
. Then press
“
CD
I
/USB/SD R
ecord “ button (16) start encoding,
CD
I
/USB/SD
operation display area (2) will flash
“ CHECKING “ few seconds (Figure 8), then
CD
I
will start playback automatically
and the
“
“ & “
“ icon will flashing(Figure 9).
CD
I
encoding was performing now.
(Figure 8) (Figure 9)
3. After completed encoding,
CD
I
and encoding system go to stop mode.
Encoding 1 track
1. Perform normal playback of the CD track you want to encode & record,
2.
Press “
CD
I
/USB/SD R
ecord “ button (16) during the playback of the desire track,
CD
I
/USB/SD operation display area
(2) will flash
“ CHECKING “ few seconds (Figure 8), then
CD
I
will start playback automatically and the
“
“ &
“
“ icon will flashing(Figure 9).
CD
I
encoding was performing now.
3. After completed encoding, unit will stop playback automatically.
Encoding by program
1.
Select the desire tracks
by following “
CD/MP3 programming
“ procedures. Then press “
CD
I
Play/Pause/Stop
“ button (10) to start playback.
2.
During CD playback, press and hold the
“
CD
I
Play/Pause/S
top “ button (10) for 2 seconds to enter the stop
mode.
3.
Press “
CD
I
/USB/SD R
ecord “ button (16) during the playback of the desire track,
CD
I
/USB/SD operation display area
(2) will flash
“ CHECKING “ few seconds (Figure 8), then
CD
I
will start playback automatically and the
“
“ &
“
“ icon will flashing(Figure 9).
CD
I
encoding was performing now.
4. After completed encoding, unit will stop playback automatically.
Remark:-
-
The recording speed is 1:1 and according to the actual plying time of the CD track
-
The system will create
a “ audio “ folder and then store the encoding track in it.
-
The recording format is preset at
– MP3
bit rate :
128 kbps, sampling rate : 44.1kHz.
-
No song title will be recorded during encoding mode.
-
To interrupt the recor
ding, press the “ USB/SD Record “ button (25) again during record mode.
-
Recording will be completed only entire song being encoded, if terminate the encoding process intermediately, there is
no track being recorded nor stored to the USB or SD/MMC card.
Phono/Aux encoding
1. Set the unit in Phono/Aux mode by
press the “ Phono/Aux “ function button (19) and
CD
I
/USB/SD operation display
area (2) will show
“ENCODE”. Place the recorded vinyl & get ready for playback.
2. For Aux in encoding, connect the headphone output at the audio device (such as MP3 player, CD player etc) to the
3.5mm Aux-in jack (31) via a 3.5 mm connecting cable (not provided). The audio channel will change to Aux in
automatically and the turntable was not able to turn.
3. P
ress “
CD
I
/USB/SD R
ecord “ button (16) once, USB/SD operation display area (2 ) will show “USB” then press “
CD
I
/USB/SD R
ecord “ button (16) again to confirm encoding,
CD
I
/USB/SD operation display area (2) will change to
“ ENCODE “ again and “
“ & “
“ icon will flashing, encoding is performing now.
4. Start the playback of the vinyl at Phono or Aux in device.
5. After completing of encoding, press
“
CD
I
/USB/SD R
ecord “ button (16) again to stop the encoding and then stop the
Phono/Aux in playback.
Summary of Contents for SMC1033
Page 14: ...E 12 ...
