V4E-2013 35mm New Line
6
4.0 IMPORTANT SAFETY INSTRUCTIONS:
The installation and maintenance should always be done by Steenbeck factory
engineers or appointed / certified Steenbeck agent / dealer.
Absolutely important is a well-connected and safe power ground system.
This is important for:
-
the safety of the user of the Steenbeck machine.
-
all printed circuit boards, motor and mechanical parts to need a proper
ground system.
-
discharge of static electricity.
The Steenbeck machine should always be placed in a dry room and free of
dust.
The temperature should be between approx. between 10ºC and 30º
( 50ºF and 90ºF)
Humidity should be approx. between 40% and 70%.
A higher humidity can also cause corrosion on electronic contacts.
IMPORTANT:
Never put drinks/liquids on the Steenbeck machine.
Liquid spill, when leaking into the machine, can cause great damage and can
be dangerous for its user.
Regularly clean the machine with the brush and special cloth delivered with
machine. NEVER use steel cleaning tools.
Never open the machine.
If there is any mechanical of electronically alignment needed, these should be
done by a Steenbeck engineer or by Steenbeck trained staff.
It’s advised to use good trained personnel to work at the Steenbeck machine.
It’s important that this personnel has read and studied the users manual.
IMPORTANT:
There is always a personal danger because of the revolving sprockets.
Be aware of this danger when having long hair, necklaces, bracelets, long
sleeves etc..
Summary of Contents for ST3512
