V4E-2013 35mm New Line
25
73. CUE MENU fig. 18 (page 31)
With this menu you have to the following possibilities:
-
return zero (73a): automatic wind back (or forward) to the set ‘0’
position.
-
cue points (73b) for checking film copies.
IMPORTANT:
always switch (with 85) the counter display to count 1 (fig. 12).
73a: return zero (RZ): by pushing this field (73a) the table will run back or
forward to the set ‘ 0 ‘ position.
By pushing on ‘wind speed’ (73c) you have the choice for three wind speeds.
Wind speed 3 is the highest wind speed.
The wind speed in this mode is the same as done by the manual speed paddle.
Wind speed 1:
synchronous speed.
Wind speed 2:
speed approx. 90 f.p.s.
Wind speed 3:
maximum speed.
If you want to change the wind speed during winding, just push ‘wind speed’ to
select the wanted speed.
IMPORTANT:
if you want to stop just push button 73g.
If you want to proceed, push return to zero (73a) again.
IMPORTANT:
during cueing or returning to zero do not use the speed paddle.
CUEING
With this facility you have the possibility to store five cue points during the
checking of a film.
By pushing knob ‘cue’ (73h) you enter the actual count.
This can be done during any running speed of the table.
73b:
Field 1 (F1): is showing the actual count in frames.
Field 2 – 5 (F2-5) by pushing ‘cue’ you enter the actual count from that
moment into F2 (F2). By pushing ‘cue’ again the next cue point is F3 , F4 till
F5.
After you have checked the film copy the table can run automatically to the set
cue points by:
<< (73d): pushing ones: winding to the proceeding cue point.
pushing twice: winding to penultimate cue point etcetera.
>> (73f):
pushing ones: winding to the next cue point.
pushing twice: winding to the next following cue point etc.
>> (73g):
stop winding during return to zero or cueing mode.
Whatever button (73d-f-g) you have pushed, you always can restart RZ and
cueing.
Clear (73i): with this button you can clear the cue point to ‘0’.
Summary of Contents for ST3512
