V4E-2013 35mm New Line
17
Sound system can be controlled by the touch screen (TS).
Every pre-amplifier for optical and / of magnetic sound can be selected by the
touch screen menu. Faders for volume, treble, bass and balance are available.
Each pre amplifier has two channels / stereo, can be set in mono and mute.
The mix of the pre-amplifiers is available on the balanced XLR +4dB outputs.
An extra RCA -10dB input is available for mixing or monitoring an external
analogue audio source.
The summing amplifier is fitted with the master volume control for audio
including treble, bass and balance of this signal.
A high quality power amplifier with 40 W output and 2 way compact
loudspeakers guarantees an excellent sound reproduction.
Reproduction of 4-channel COMMAG films and separate (SEPOPT) 35mm
sound film or sound negatives is also possible as an option.
Audio playback is automatically muted when the table runs more than 30 f.p.s..
The Steenbeck Universal counter is standard equipment.
This counter for all formats measures all film length, elapsed time and frames
and is able to convert every count immediately into another count.
Within the universal counter display is also monitored:
-
the exacts running speed of the film.
-
measurement of the MAG 1 sound track, by switching.
-
Vario speed is active.
-
the selected synchronous speed.
-
the picture-sound shift advance / retard frames
( for ST3514-ST3516 only).
The universal counter system is operated mainly from the touch screen menu
which also has a film format calculator and transfer counts to a cueing system.
The advance and retard system for sound tape (only on MAG 1 of ST3514 and
ST3516) can be operated at all speeds by a differential gear.
By using the advance and retard switch the sync mode can be matched to
within one teeth of a frame or after switching over in single frame in either
direction to the picture. This enables in a short time exact perforation
synchronisation.
The touch screen is the operation centre of the ‘New Line’ Steenbeck.
This touch screen gives the operator of the table some interesting tools:
- light menu for levelling working lamp for standard light as well as LED light.
- calculator menu to calculate and transfer counts, operation of universal
counter.
- cue menu: return zero system and 5 cue point are available.
- count 1 and 2 menu.
- sound menu.
- sensor menu.
- elapsed time counter for maintenance.
All preceding items are explained in section 6.3 and 6.4.
Summary of Contents for ST3512
