D3X RS
D3X RS Operator’s Manual
9
To remove the arbor (drill bit, tap chuck), raise the motor, and then rotate the
spindle (
1
, Fig. 3) in such a way to align the openings in the spindle and gearbox (
2
).
Next, insert the MT3 drift
(
3
) into the opening above the arbor (drill bit, tap chuck),
hold the carrying handle with one hand, and then tap the drift using a mallet (
4
).
Fig. 3.
Removing the arbor, drill bit, or tap chuck
1
2
3
4
