D3X RS
D3X RS Operator’s Manual
3
1. GENERAL INFORMATION
1.1. Application
The D3X RS is a drilling machine with electromagnetic base, designed to drill holes
either with diameters of 12–75 mm (0.47–2.95’’) to a depth up to 76 mm (3’’) using
annular cutters or with diameters of 8–32 mm (0.31–1.26’’) to a depth up to 76
mm
(3’’)
using
twist drill bits. In addition, it is capable to change the rotation direction to
allow tapping by using a tap chuck with axial compensation.
The electromagnetic base
allows the drilling machine to be fixed to ferromagnetic
surfaces
with
a force that ensures operator safety and proper machine operation.
A safety chain protects the machine from dropping in case of a power loss.
The D3X RS has a swivel base and thus is capable to be rotated in a range of
±15°
and
to
be
moved
out
up
to
15
mm
(0.6’’)
without
moving
the
electromagnetic
base.
Accessories allow, for instance, quick changing of tools or drilling in pipes.
1.2. Technical data
Voltage
1~ 110–120 V, 50–60 Hz
1~ 220–240 V, 50–60 Hz
Total power
1800 W
Motor power
1650 W
Spindle shank
MT3
Tool holder
19 mm Weldon (3/4’’)
Drilling diameter with annular cutter
12–75 mm (0.47–2.95’’)*
Drilling diameter with twist drill bit
8–32 mm (0.31–1.26’’)
Maximum drilling depth
76 mm (3’’)
Maximum tap size
M24 (G3/4’’)
Electromagnetic base holding force
(surface with the thickness of 22 mm and roughness
R
a
= 1.25)
19 500 N
Electromagnetic base dimensions
110 mm × 220 mm × 56 mm
4.3’’ × 8.7’’ × 2.2’’
Stroke
225 mm (8.9’’)
Rotational speed under load
80–160 rpm (gear I)
210–420 rpm (gear II)
Minimum workpiece thickness
10 mm (0.39’’)
Protection class
I
Noise level
More than 85 dB
Required ambient temperature
0–40°C (32–104°F)
Weight
27 kg (60 lbs)
*
If more than 60 mm (2.3’’), MT3 arbor with 32 mm Weldon tool holder required (UCW-0191-00-00-00-0).
