BM-7
BM-7
Operator’s Manual
7
2. SAFETY PRECAUTIONS
1. Before use
, read this Operator’s Manual and complete a training in occupational
safety and health.
2.
Use only in applications specified in this Operator’s Manual.
3. Make
sure
that
the
machine
has all parts and they are
genuine
and
not
damaged.
4. Make sure that the specifications of the power source are the same as those
specified on the rating plate.
5. Do not carry the machine by the cord and do not pull the cord. This can cause
damage and electric shock.
6. Keep untrained bystanders away from the machine.
7. Before each use, ensure the correct condition of the machine, power source,
power cord, plug, control parts, and tools.
8. Before each use, make sure that no part is cracked or loose. Make sure to
maintain correct conditions that can have an effect on the operation of the
machine.
9. Keep the machine dry. Do not expose the machine to rain, snow, or frost.
10. Keep the work area well lit, clean, and free of obstacles.
11. Do not use near flammable materials, or in explosive environments.
12.
Use only tools specified in this Operator’s Manual.
13. Do not use tools that are dull or damaged.
14. Make sure that the cutting inserts and the milling head are correctly attached.
Remove wrenches
from
the
work
area
before you
connect
the
machine
to
the
power source.
15. Do not use the machine so that the milling head is up.
16. If the cutting edge of an insert is worn, turn all inserts by 90°. If all cutting edges
are worn, install new inserts specified
in this Operator’s Manual.
17. Use eye and ear protection, non-skid footwear, and protective clothing. Do not use
loose clothing.
18. Do not touch chips or moving parts. Do not let anything catch in moving parts.
19. After each use, clean the machine and the milling head
with a dry cotton cloth
and no chemical agents. Do not remove chips with bare hands.
20. Maintain the machine and install/remove parts and tools
only after you unplug the
machine from the power source.
