STEELFORCE PRO 100 HC
9
13.12
4x Cover
cap
3.4.1 Mounting the Crossbar - continued
Install the following parts:
13.5
2 x M6x6 Adjusting screw
Now turn the legs with the crossbar (with two people). The crossbar is now just
above the floor.
Make sure that the legs do not fall over during assembly.
Extend the frame to the desired width.
Screw the studs into the crossbar and tighten them lightly.
A = position of the T-foot
Attach the blanking cap to the location shown
O R
B = position of the C-foot
Attach the blanking cap to the location shown
3.4.2 Mounting the feet
First choose the position of the legs!