STEELFORCE PRO 100 HC
6
2.9 Emergency Instructions
Immediately leave the area around the desk when it starts to move
spontaneously. Do not use the desk. Have the desk repaired by a specialized
company. Do not use the desk again until it has been repaired.
If you notice anything unusual, take the desk out of service immediately. Have
the desk repaired by a specialized company. Do not use the desk again until it
has been repaired.
2.10 Maintenance and upkeep
Always keep the product in good condition. If necessary, have it checked regularly
by a professional.
Do not repair the desk or any of its parts yourself.
Do not make any changes to the worktop or desk construction.
Defective parts may only be replaced with new original parts from the
manufacturer. Only use original replacement parts from the manufacturer. In
doing so, these installation instructions must be observed.
2.11 Cleaning
Once a week, remove the dust from the desk with a dry cloth.
Clean the desk every two weeks with a damp cloth and a mild detergent.
2.12 Persistent risks
This office is built according to the latest state of the art and according to recognized
safety regulations. Nevertheless, its use can
endanger the health and safety of users or third parties and cause damage to the desk
or other parts. The desk may only be used:
for the intended purpose;
if it is completely safe.
2.8 Specific dangers
Adjusting the height of the desk carries the risk of injury. Make sure that no one
else is in the immediate vicinity of the desk.
When mounting the desk, provide enough space to avoid collisions in all possible
directions (e.g. sloping roof, fixed objects, filing cabinets, waste bins, etc.).
Provide sufficient space to avoid collisions if objects such as computers or
peripherals are on the worktop.
Provide a clearance of at least 25mm from all other furniture around the desk