STEELFORCE PRO 100 HC, Assembly Manual, Page: 12 / 16

STEELFORCE PRO 100 HC
12

Make sure the legs are in the lowest position (zero position).
 Slide the drive shafts (hexagon) from the outside to the inside through the hexagonal
openings in the legs.
 Slide the two axles into the frame about 15 cm.
 Attach a hex stopper to each axle.
 Now slide the two hexagonal shafts into the receiving shaft.
# Name Qty
06 Drive shaft kit 1
3.4.4 Mounting the Drive Shaft
Install the following parts:
13.7 2 x M10 Installation key
13.10 1 x Screwdriver
13.11 2x Hexagon stopper