background image

4

 

Warning:  

Stay alert, what you are doing.

  

 

 

 

Warning:  

Follow maintenance instructions specified in this manual.

 

 

Warning:  

Check power cords before using. Damaged cords can reduce performance of pressure  

 

washer or cause a fatal electric shock.

  

 

 

 

Warning:  

Keep operating area of all persons or animals.

  

 

Warning:  

To reduce the risk of injury, close supervision is necessary when this product is used near

 

children.

 

Warning:  

Always use both hands when operating pressure washer to maintain complete control of  

 

the wand.

 

 

 

 

Warning:  

Do not touch nozzle or water spray while operating.

 

 

 

Warning:  

Wear safety goggles while operating.

 

Warning:  

Disconnect power plug from the outlet when not in use and prior to the detaching of the

 

high-pressure hose.

 

 

 

Warning:  

Only pressure washer hoses and nozzles should be used.

 

 

 

Warning:  

Never tie knots or kink the high-pressure hose as damage could result.

 

 

 

Warning:  

Prior to starting or the pressure washer in cold weather, be sure ice has not formed in any  

 

part of the equipment.

 

 

 

Warning:  

Carefully observe all detergent instructions and warnings before using.

 

Warning:  

The pressure washer should not be used in areas where gas vapours may be present. An  

 

electric spark could cause an explosion or fire.

 

Warning:  

To minimize the amount of water getting into the pressure washer, the unit should be  

 

placed as far as possible from the cleaning site during operation.

Safety and Operation Rules

Summary of Contents for SP-WE180



















Reviews: