Owner’s Manual
11
Additional Warnings (cont’d)
Accessories (cont’d)
Never use any grinding or sanding accessory near any flammable
material. Sparks could cause a fire.
Both the tool collet and the accessory might become hot during normal
use. Allow to cool before touching.
Never attempt to hold the work piece with one hand while using any saw
or cutting tool. These accessories could bind if they become canted and
could cause the tool to kick back, possibly causing serious injury.
Dust and debris from work pieces may contain chemicals known to
cause cancer, birth defects or other reproductive harm. These chemicals
amy include (but are not limited to) lead from lead-based paints, silica
from masonry products, and arsenic and chromium from chemically
treated lumber. Always work in a well-ventilated area and use approved
safety equipment rated for the specific chemical(s) you might be
exposed to.
Always use accessories at their recommended speeds. This manual
includes several tables with recommended speed settings for various
accessories on various materials.
WARNING! RUNNING ACCESSORIES AT EXCESSIVE SPEED CAN
CAUSE FRAGMENTATION AND SERIOUS INJURY FROM FLYING
DEBRIS. IT CAN ALSO CAUSE THE WORK PIECE TO OVERHEAT,
RESULTING IN CHARRING, MELTING, AND/OR DISCOLORATION.
CAUTION: ALWAYS REFER TO THE RECOMMENDED SPEED
TABLES IN THIS MANUAL AND EXPERIMENT ON SCRAP
MATERIAL BEFORE STARTING YOUR ACTUAL PROJECT TO
ENSURE THAT YOU WILL NOT DAMAGE YOUR WORK
PIECE.
