Owner’s Manual
15
Operation (cont’d)
General Hints
Your rotary tool and its accessories work using high RPM (up to
35,000PRM) instead of brute force. When working, use the lightest possible
touch while retaining full control of the tool and allow the high-speed
accessory to do its work. For heavier work, make multiple passes instead of
forcing the tool. Do not lean on or push the tool while working.
Your rotary tool can be used for carving, grinding, engraving, polishing,
cutting, brushing, drilling, and more. Your kit includes a wide assortment of
accessories for these tasks and you can order more by visiting the location
where you purchased this kit. This tool uses high speed and low torque- the
opposite most power tools, which rely on low speeds and high torque. This
gives your rotary tool some unique capabilities, including cutting hardened
steel, engraving glass, polishing plastic, and other uses that most power
tools simply cannot duplicate. Learning how to use your tool’s high speed to
best advantage is the key to getting the most from this rotary tool.
WARNING! FORCING THE TOOL COULD CAUSE THE ACCESSORY TO
BREAK AND SCATTER FRAGMENTS AND OTHER DEBRIS AT HIGH
SPEED. NEVER FORCE THE TOOL AND ALWAYS REMAIN CLEAR OF
THE PATH OF DEBRIS. ALWAYS WEAR EYE PROTECTION WHEN
USING THIS TOOL. FLYING FRAGMENTS CAN CAUSE BLINDNESS AND
OTHER SERIOUS INJURY.
